Industrial Engineering, now part of Thermogenics, has served Florida from Orlando since 1948. Our team provides 24/7 emergency service, maintenance, repairs, parts and rentals for theme parks, hotels, hospitals and plants across Central Florida, from Kissimmee and Sanford to Tampa, Lakeland, Daytona Beach and Melbourne.
Monthly, quarterly and annual plans, combustion tuning and steam trap surveys, with every inspection detail shared with you.
Emergency repair, retubing, refractory, burner conversions and controls troubleshooting on all makes and models.
Burner parts, gauge glass, gaskets, tubes, relief valves, pumps and controls, with critical spares on hand.
Steam and hot water rental boilers through the Thermogenics fleet, with setup and support across the Southeast.
Industrial Engineering sells, installs, services and repairs boilers, pressure vessels, piping and industrial combustion systems. We are a formal rep for Johnston Boiler, Penn Separator and MEPCO.
Custom-designed boiler rooms, installations, piping, heat recovery and vent stacks, delivered and serviced by one team.
An assessment of your boiler room’s energy use, with a written report of cost-saving and reliability improvements. Call 407-293-9317 to book.
More than 10 Thermogenics locations across North America back up the Orlando team with parts sourcing and rental units.
Theme parks and hospitality lead the work in Central Florida, alongside hospitals, food and beverage, and manufacturing. With little space-heating demand here, these facilities rely on steam and hot water for laundry, kitchens, sterilization, humidification and process heat, year-round.
Process heat and plant steam
Laundry, kitchens and process heat
Campuses, government and commercial buildings
Process steam, cleaning and sterilization
Sterilization, humidification and heating
Hotels, resorts and convention centers
Central Florida boilers carry hot water, laundry, sterilization and process steam every month of the year, with no heating season to rest them. Planned maintenance keeps them out of emergency mode. Choose a monthly plan (eleven inspections plus the annual), a quarterly plan (three inspections plus the annual) or the annual inspection on its own, performed with your government authority or insurance inspector present.
At each annual visit we reseal the boiler with new gaskets, check the system for worn or failed components, and test the burner for efficiency and safety. Plan customers get priority scheduling and fixed labor rates. We share every inspection detail with you.
Regular maintenance catches small issues early, extends equipment life and keeps energy use down. Hospitals feel this most, because a boiler that supports sterilization and humidification can’t go down unexpectedly. A lot of the time the issue isn’t the boiler, it’s the system. Steam traps left 3–5 years can have 15–30% failed, and regular surveys can bring that under 5%.
Boilers lose efficiency as they age, and maintenance can’t always recover it. For older equipment, we add efficiency upgrades like linkageless controls, panel and level-control upgrades, VFDs and low-NOx burners, and can pair them with a free boiler room energy survey to show where the savings are.
Every service vehicle is stocked with essential tools and components, so repairs aren’t held up waiting on parts. We work on Cleaver-Brooks, Johnston, Fulton, Lattner and Lochinvar equipment, and on every other make, model and type of boiler.
We stabilize the system and restore operation first, then trace the cause of the failure and how to stop it happening again. Our work runs from burners and burner conversions to controls troubleshooting, retubing, refractory and piping.
The Orlando shop backs up the service vehicles with the parts repairs call for most. Our technicians repair steam, hot water and thermal fluid systems, from older legacy boilers to modern high-efficiency models.
Our pump rebuild program overhauls failed pumps, and with long lead times on new Grundfos pumps and kits, a rebuild is often the faster path.
Our Orlando shop stocks the parts technicians reach for most: burner parts, gauge glass, manhole and handhole gaskets, boiler tubes, relief valves, pumps, steam traps, regulators and water level controls. Critical spares stay on hand so a failed part doesn’t turn into a long outage.
We also supply the rest of the boiler room: Apollo ball valves, ASCO solenoid valves, Bell & Gossett and Burks pumps, Cashco and Spence regulators, Everlasting blowdown valves, Weiss gauges and thermometers, insulation and vent stacks.
Controls & burner brands
Grundfos kits can take 8–10 weeks and new pumps 10–12. We stock and source them so a failure doesn’t mean weeks down.
Rental units and parts sourcing from over 10 Thermogenics locations, including Yown’s Boiler Service in Jacksonville.
Most rental calls start with a failure that means a long or costly repair. New boilers can take months to deliver, and a rental keeps the plant running in the meantime. Planned outages can be covered too, with rentals running from as little as 8–10 days to several months.
Through Thermogenics, we supply containerized steam, hot water and thermal fluid rental boilers, plus partner inventory when the size you need isn’t in the fleet. The units ship in standard sea-can containers, so there are no oversize escort loads, but they need a crane or a rented lowboy trailer to set. For serious inquiries we get someone on site quickly to plan placement, then set up the unit and support it while it’s on rent. Plan the steam connection early. If there’s no line stubbed out with a valve on it, piping alone can take weeks.
Standalone Thermogenics rental boilers run 150–500 HP, built to a standard 250 psig MAWP design and operated from 70 to 225 psig. Larger units, complete boiler rooms, feedwater tanks, pumps and water treatment are available on request.
| Unit type | Thermocoil coil-tube steam boilers in sea-can containers |
|---|---|
| Size | 150 to 500 HP per unit; larger on request |
| Pressure | 250 psig design (MAWP), operating 70–225 psig |
| Fuel | Natural gas, propane or No. 2 oil |
| Containers | Two-boiler 40 ft, or single 20 ft and 30 ft units |
| Network range | 30 BHP to 2,200+ BHP through Thermogenics partners |
Thermogenics rental specifications. Units are matched to your load from the Thermogenics fleet and partner inventory; call for current availability.
Visit ieboilers.com
From Orlando, our team covers Winter Park, Kissimmee, Sanford, Apopka and the theme park corridor, out to Ocala, Leesburg, Titusville and Lake Wales. Lakeland and Daytona Beach are about an hour away, Tampa and Melbourne about 1.5 hours, Fort Myers about 3 hours and Miami about 4.
Cities & towns we serve
Yown's Boiler Service
3501 West 20th St. · 904-786-1645
≈ 120 mi away
Matt Marshall & Co.
2249 Bishop Road · 336-292-8477
≈ 520 mi away
Thermogenics
4426 Mt Carmel Tobasco Rd., Suite A · 513-528-0500
≈ 750 mi away
Hartford Boiler Repair Works
44 Cody St. · 860-953-9845
≈ 1,030 mi away
Case studies and articles from across the Thermogenics group, the engineering and equipment network now behind the Industrial Engineering team.
Thermocoil boilers in the same footprint as the old firetubes more than doubled steam generation.
Read more
Worn firetubes replaced with high-pressure Thermocoil boilers, a condensate and deaerator system, and fast-acting controls.
Read more
How sterilization, humidification and lab loads shape boiler selection as hospitals move other loads to low-grade heat.
Read moreCall 407-293-9317. Emergency service runs 24/7, and the call connects directly with a knowledgeable technician, who arrives with the essential tools and components on the truck.
Yes. We service all makes, models and types of boilers, including Cleaver-Brooks, Johnston, Fulton, Lattner and Lochinvar, and Industrial Engineering is a formal rep for Johnston Boiler. We also work on the burners and controls that go with them, from Power Flame and Weishaupt burners to Honeywell and Fireye controls.
Industrial Engineering holds a National Board R-stamp, authorizing repairs and alterations to boilers and pressure vessels, and is a Florida State Certified Mechanical Contractor, CM-C1249246. We are also registered with Avetta and ISNetworld for plants that require contractor safety prequalification.
The Florida Division of State Fire Marshal – Boiler Safety Program, which administers the Boiler Safety Act, Chapter 554 of the Florida Statutes, under rules in Chapter 69A-51, F.A.C. It covers construction, installation, inspection and repair, with a focus on boilers in public assembly locations.
A monthly plan fits most hotels and attractions, since Central Florida boilers don’t get a heating-season break. That means eleven inspections plus the annual, with combustion tuning on each visit. We add steam trap surveys to cut wasted steam and keep critical spares on hand in the Orlando shop.
Yes. We supply containerized steam, hot water and thermal fluid rental boilers through Thermogenics, plus partner inventory. We’ll ask about your process, pressure, fuel, voltage, water and where the unit will sit, then get someone on site quickly to plan placement and set it up.
Our Orlando team covers roughly 150 miles north and 250 miles south of Orlando, from Ocala down to Fort Myers and Miami. Sister branch Yown’s Boiler Service in Jacksonville covers more of the Southeast.
Yes. Industrial Engineering joined Thermogenics in 2023. It’s the same Orlando team, phone number and email, now backed by the Thermogenics rental fleet, parts sourcing and sister branches across North America.
Emergency service runs 24/7 on 407-293-9317. Quotes and rental inquiries go to the Orlando team at info@ieboilers.com.
Request emergency service online