Hot Water Boilers
Automatic packaged units for low, medium and high temperature applications from 75 to 1000 BHP .
Product(s)
2.51 mmBtu/hr to 20.08 mmBtu/hr
Pressure
Up to 500 PSIG
Codes
Designed to ASME and CSA requirements and Hyrdo approved.
Fuels
Natural gas, propane and Number 2 oil.
Efficiency
Up to 85%
Ignition Type
Electric Spark Ignited, Interrupted gas pilot.
We optimize your boiler’s performance to support uninterrupted business
- Redesigned combustion air blower ensures quiet operation.
- Redesigned damper blades on combustion blower provide lower excess air levels.
- Redesigned burner increases efficiency.
- Complete flexibility on burner management systems.
- Linkageless control provides lower turndown rates and more consistent efficiencies across the modulating range.
- 4-20 ma modulation for feedback to PLC based lead/Lag control.
- Solid state coil temperature system with individual temperature readouts and set points.
- Fully modulating burner with up to 10:1 turndown on Natural Gas and #2 Oil.
- Switch controls and warning devices located in a central control panel at the front of the boiler skid for ease of operation and troubleshooting.
Standard Equipment Features
- All coils have individual monitoring sensors.
- Quick response to load changes.
- Rapid start up from cold start.
- Long life with minimal maintenance coils designed for 1000 PSIG.
- Rear door access at floor level without disturbing refractory seal.
- All electrical boxes are oil/dust tight.
- All electrical conduit liquid tight.
- Separate high voltage side panel.
- Combustion air blower at floor level for ease of inspection and maintenance.
- Recirculating pump and combustion blower direct drive.
- Most service connections located at common junction point.
- Double walled boiler shell preheats combustion air and cools outer casing, thereby minimizing radiation losses.
Add on Ancillary Equipment
Packaged Deaerators
Therm-O-Pac Packaged Deaerators produce water with oxygen content less than…
Thermiser Heat Recovery
Preheat or process water from waste heat, three to seven percent average fuel savings…
Let’s connect and work together
Our team can provide a qualified and optimized service experience.